Path: usenet.ee.pdx.edu!cs.uoregon.edu!sgiblab!uhog.mit.edu!europa.eng.gtefsd.com!newsxfer.itd.umich.edu!uunet!news.dal.mobil.com!japeters From: japeters@dal.mobil.com (J.A. Peters [Jim]) Newsgroups: comp.sys.sun.admin Subject: Re: serial line over twisted pair wiring? Date: 16 Aug 1994 15:15:21 GMT Organization: MEPTEC - Mobil Oil Corporation Lines: 16 Distribution: world Message-ID: <32ql69$rth@dlsn31> References: NNTP-Posting-Host: dlsunf.dal.mobil.com In article , vlsi_lib@netcom.com (Gerard Malecki) writes: > I've just installed a pair of HP laserjet 4m+ printers. > However, one person in the office wants to be able to send from his pc; > everyone else is sending from > a unix workstation to the jetdirect card. Does anyone have > any suggestions on how I might be able to utilitize the existing > wiring to run a serial line? Or a good solution for sending > from the pc to the printer? if you are using netware then you can configure a print queue for a hp printer. hp ships pc drivers etc with the 4simx so they more than likely are available for the 4m+ if not sent along in the same shipp- ing container as the printer. cheers, james, japeters@dal.mobil.com